Sound Devices 8-Series Firmware v8.12

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote.

Follow this link to get firmware update v8.12:

https://www.sounddevices.com/download/

New

  • Take List shortcut option added to * and ** Toggle Switch menus.

Change

  • Bus Names character limit increased from 12 to 20 characters. 

Fixed

  • 888 no longer falsely displays “Unit is overheating” error messages shortly after powering on.

Audio Ltd announces the A-15PIN Sony Camcorder Accessory with A10-RX Firmware v3.00 and Mic2Wav v3.00!

A-15PIN 

Sound Devices is excited to introduce the A-15PIN cradle accessory for the A10-RX receiver. The A-15PIN allows direct connection of the A10-RX receiver to Sony camcorders and extension units and passes two channels of AES digital audio via the 15 pin D-type connector.

 A10-RX v3.00 Firmware

  • Supports the A-15PIN adapter for Sony’s proprietary wireless slot. Connects an A10-RX directly to Sony camcorders/extension units and sends two channels of AES digital wireless audio. When connected to the camcorder via the A-15PIN, the A10-RX receives power and powers up and down with the camcorder.
  • Important: Update the A10-RX receiver to v3.00 firmware prior to docking in the A-15PIN cradle accessory.  
  • For a complete list of changes and supported Sony Cameras, please visit: 

https://www.audioltd.com/resources/firmware-downloads/

Mic2Wav v3.00

  • Mic2Wav now supports the new A-15PIN accessory. Connect and A10-RX to Mic2Wav via the A-15PIN to update firmware and send user group files. 
  • A USB 3.0 port is required to power the A10-RX via the A-15PIN. If a USB 3.0 port is not available, connect two USB 2.0 ports to the A-15PIN using the Sound Devices MX-USBY Cable, USB-C to dual USB-A Y-cable.  
  • To download the Mic2Wave Utility, please visit: https://www.audioltd.com/resources/mic2wav/

NEW FIRMWARE RELEASE: New Audio LTD A10 Wireless v2.50 Firmware release with new User Groups!

SOUND DEVICES and AUDIO LIMITED announces New A10 Wireless v2.50 Firmware release with new User Groups!

Version 2.50 adds User Groups, which enables a user to build a list of frequencies with names, allowing quick and easy tuning of the A10-TX and A10-RX.

Sound professionals can match easy-to-remember names with pre-coordinated frequencies. When User Groups are loaded into the TX and RX, the frequency menus are simplified, showing only the user-selected frequencies. This eliminates scrolling and provides a quick and easy way to set frequencies on location.

In support of the A10 Firmware v2.50, new versions of the Mic2Wav utility and the A10-TX Remote app are also available, and v4.54 firmware release for the Sound Devices 688/SL-6 combination.

Below is the list of new firmware:
• A10-TX (all variants) v2.50 firmware
• A10-RX (all variants) v2.50 firmware
• 688 v4.54 firmware
• Mic2Wav Mac v2.50 software update
• Mic2Wav Windows v2.50 software update
• A10-TX Remote Android v2.50 software update
• A10-TX Remote iOS v2.50 software update

Highlights of New features include:

**A10-TX v2.50**

• Support for User Group Frequency selection, allowing for faster and easier frequency setup by user-defined descriptive names and frequency groups. Requires Mic2Wav v2.50 generated .ALUG files to be loaded into the transmitter via a micro SD card.
• Menu Lock. Press and hold the left and right buttons to lock out access to menu settings. When menu access is locked, a lock icon appears in the main display. Hold the left and right buttons again to unlock menu access. When locked, the Power button remains active.

**A10-RX v2.50**

• Support for User Group Frequency selection, allowing for faster and easier frequency setup by user-defined descriptive names and frequency groups. 
• A10-RX power off shortcuts.

**A10-TX Remote v2.50**

• Support for A10 User Groups. Allows for frequency selection by descriptive name. Requires an A10-TX running v2.50 firmware and loaded with a user group .ALUG file. Use Mic2Wav v2.50 to generate .ALUG files.

**Mic2Wav v2.50 for Windows**

• Convert .mic files to .wav files based on timecode range.
• Create, edit, and export User Group .ALUG files for A10-TX and A10-RX.

**Mic2Wav v2.50 for Mac**

• Convert .mic files to .wav files based on timecode range.
• Create, edit, and export User Group .ALUG files for A10-TX and A10-RX.
• Update A10-RX firmware via A10-RX XLR or A10-Rack.

**688 v4.54**

• Support for Audio Ltd A10-RX User Groups feature when used in the SL-6.

For a complete list of new features, changes and fixes please visit the web links below.

Sound Devices
https://www.sounddevices.com/support/downloads/688-firmware

Audio Limited
https://audioltd.com/resources/firmware-downloads/
https://audioltd.com/resources/mic2wav/
https://play.google.com/store/apps/details…
https://itunes.apple.com/us/app/a10-tx-remote/id1265218172…

Please contact us on 087 551 1034 with any additional questions.